* Dividing Plates * Tail Stock * Threaded back plate * Centre for head & tailstock
OPTIONAL ACCESSORIES:
* Chuck Size 160mm LC-130315
FEATURES:
* Dividing head can divide in any angle by the direct indirect or different methods
* The ratio between the worm and the worm gear is 40:1
* The spindle is hardened and ground and rigidly supported in taper roller bearings
* The swivel head can be locked in any angle from 10ø below horizontal to 90ø vertical -precision fitting to base assures smooth rotation
* All models have threaded spindle nose and 24 hole dividing plate with easy conversionto fast direct indexing on numbers 2 3 4 6 8 12 and 24.
* Easy indexing of all numbers from 2 to 50 and many numbers from 52 to 380 and for spiral cutting
* Accurate precision little back lash fine appearance and strong structure assure smoth rotation
1. UNIVERSAL Dividing Head can divide in any angle by the direct, in-direct, or different methods. The ratio between the warm and the warm gear is 40:1.
2. Hardened and ground spindle is rigidly held in a taper roller bearing. Worm is hardened and ground also.
3. The swivel head can be locked of any angle from 10˚ below horizontal to 90˚ vertical-precision fitting to base assures smooth rotation.
4. All models have threaded spindle nose and 24 hole dividing plate with easy conversion to fast direct indexing on numbers 2,3,4,6,8,12, and 24.
5. Easy indexing of al numbers from 2 to 50 and many numbers from 52 of 380. Model BS-2 is also equipped for different indexing for all numbers from 2 to 380, and for spiral cutting.
6. Accurate precision, little backlash, fine appearance and strong structure so can assure smooth rotation.
Parameters of DIVIDING HEAD: BS-1 VERTEX
DESCRIPTION | Divioding Head - Semi-Universal |
---|---|
CENTER HEIGHT | 128mm |
HEIGHT | 220mm |
CENTRE TAPER | B & S No.9 |
BORE | 20.0mm |
WEIGHT NETT/GROSS | 35/ 36,0kg |
VOLUME | 0.033 |
Similar Products
Stock Code | Price Exc. | Price Inc. | Divioding Head - Semi-Universal | 128mm | 220mm | B & S No.9 | 20.0mm | 35/ 36,0kg | 0.033 |
---|---|---|---|---|---|---|---|---|---|
DH-130000 |
$ 815.00 |
$ 937.25 |
Dividing Head-Semi-Universal | 100mm | 173mm | B & S No.7 | 18.0mm | 19/ 20kg | 0.0204 |
DH-130100 |
$ 985.00 |
$ 1,132.75 |
Deviding Head - Semi-Universal | 100mm | 173mm | B & S No.7 | 18.0mm | 16/ 18.0kg | 0.024 |
DH-130101 |
$ 173.98 |
$ 200.08 |
Back Plate -Semi-Universal | 100mm | |||||
DH-130102 |
$ 143.98 |
$ 165.58 |
Centre - Semi-Universal | 100mm | |||||
DH-130200 |
$ 1,190.00 |
$ 1,368.50 |
Divioding Head - Semi-Universal | 128mm | 220mm | B & S No.9 | 20.0mm | 35/ 36,0kg | 0.033 |
DH-130300 |
$ 1,205.00 |
$ 1,385.75 |
Dividing Head-Semi-Universal | 128mm | 220mm | B & S No.9 | 20.0mm | 35/ 36.0kg | 0.033cm |
DH-130400 |
$ 2,210.00 |
$ 2,541.50 |
Dividing Head-Fully-Universal | 132.7mm | 236mm | B & S No.10 | 24.5mm | 62/ 66.0kg | 0.034 |
DH-130425 |
$ 139.00 |
$ 159.85 |
Gear for BS1 Dividing Head | 0.0001 | |||||
DH-130426 |
$ 59.00 |
$ 67.85 |
Shaft to suit BS1 Dividing Head | 0.0001 | |||||
DH-130427 |
$ 59.00 |
$ 67.85 |
Threaded Clamp Bolt - BS1 | 0.0001 | |||||
DH-130500 |
$ 335.00 |
$ 385.25 |
Dividing Plates - BS-2 | ||||||
DH-130505 |
$ 165.00 |
$ 189.75 |
WORM WHEEL - BS-0 |