Chevpac Machinery (NZ)

Location

30 Saleyards Road,
Otahuhu, Auckland

Opening Times

Mon to Fri: 8am - 4:30pm
Sat: 9am - 12pm
(except long weekends)

To Order Call:

TOLL FREE0508 243 872
Show Specials
Specials
   
DIVIDING HEAD: BS-1 VERTEX
SKU: DH-130200
Availability: In Stock

Price per Unit
$1,190.00 (Exc GST)
$1,368.50 (Inc GST)

ACCESSORIES:
* Dividing Plates * Tail Stock * Threaded back plate * Centre for head & tailstock

OPTIONAL ACCESSORIES:
* Chuck Size 160mm LC-130315

FEATURES:

* Dividing head can divide in any angle by the direct indirect or different methods
* The ratio between the worm and the worm gear is 40:1
* The spindle is hardened and ground and rigidly supported in taper roller bearings
* The swivel head can be locked in any angle from 10ø below horizontal to 90ø vertical -precision fitting to base assures smooth rotation
* All models have threaded spindle nose and 24 hole dividing plate with easy conversionto fast direct indexing on numbers 2 3 4 6 8 12 and 24.
* Easy indexing of all numbers from 2 to 50 and many numbers from 52 to 380 and for spiral cutting
* Accurate precision little back lash fine appearance and strong structure assure smoth rotation

1. UNIVERSAL Dividing Head can divide in any angle by the direct, in-direct, or different methods. The ratio between the warm and the warm gear is 40:1.

2. Hardened and ground spindle is rigidly held in a taper roller bearing. Worm is hardened and ground also.

3. The swivel head can be locked of any angle from 10˚ below horizontal to 90˚ vertical-precision fitting to base assures smooth rotation.

4. All models have threaded spindle nose and 24 hole dividing plate with easy conversion to fast direct indexing on numbers 2,3,4,6,8,12, and 24.

5. Easy indexing of al numbers from 2 to 50 and many numbers from 52 of 380. Model BS-2 is also equipped for different indexing for all numbers from 2 to 380, and for spiral cutting.

6. Accurate precision, little backlash, fine appearance and strong structure so can assure smooth rotation.




Parameters of DIVIDING HEAD: BS-1 VERTEX

DESCRIPTION Divioding Head - Semi-Universal
CENTER HEIGHT 128mm
HEIGHT 220mm
CENTRE TAPER B & S No.9
BORE 20.0mm
WEIGHT NETT/GROSS 35/ 36,0kg
VOLUME 0.033

Similar Products

Stock Code Price Exc. Price Inc. Divioding Head - Semi-Universal 128mm 220mm B & S No.9 20.0mm 35/ 36,0kg 0.033
DH-130000
$
815.00
$
937.25
Dividing Head-Semi-Universal 100mm 173mm B & S No.7 18.0mm 19/ 20kg 0.0204
DH-130100
$
985.00
$
1,132.75
Deviding Head - Semi-Universal 100mm 173mm B & S No.7 18.0mm 16/ 18.0kg 0.024
DH-130101
$
173.98
$
200.08
Back Plate -Semi-Universal 100mm          
DH-130102
$
143.98
$
165.58
Centre - Semi-Universal 100mm          
DH-130200
$
1,190.00
$
1,368.50
Divioding Head - Semi-Universal 128mm 220mm B & S No.9 20.0mm 35/ 36,0kg 0.033
DH-130300
$
1,205.00
$
1,385.75
Dividing Head-Semi-Universal 128mm 220mm B & S No.9 20.0mm 35/ 36.0kg 0.033cm
DH-130400
$
2,210.00
$
2,541.50
Dividing Head-Fully-Universal 132.7mm 236mm B & S No.10 24.5mm 62/ 66.0kg 0.034
DH-130425
$
139.00
$
159.85
Gear for BS1 Dividing Head           0.0001
DH-130426
$
59.00
$
67.85
Shaft to suit BS1 Dividing Head           0.0001
DH-130427
$
59.00
$
67.85
Threaded Clamp Bolt - BS1           0.0001
DH-130500
$
335.00
$
385.25
Dividing Plates - BS-2            
DH-130505
$
165.00
$
189.75
WORM WHEEL - BS-0