* Dividing Plates * Tail stock * Centre & driving assembly * Gear arbor * 12pcs gears and arms.
OPTIONAL ACCESSORIES:
* Suit LC-141300 lathe chuck
FEATURES:
* This fully universal dividing head come complete with dividing plates tailstock flange plate and driving gears
* Has all the features of the BS-1 dividing head but with a larger centre height and bore
* Made to the same rigid specifications as all Vertex products
1. UNIVERSAL Dividing Head can divide in any angle by the direct, in-direct, or different methods. The ratio between the warm and the warm gear is 40:1.
2. Hardened and ground spindle is rigidly held in a taper roller bearing. Worm is hardened and ground also.
3. The swivel head can be locked of any angle from 10˚ below horizontal to 90˚ vertical-precision fitting to base assures smooth rotation.
4. All models have threaded spindle nose and 24 hole dividing plate with easy conversion to fast direct indexing on numbers 2,3,4,6,8,12, and 24.
5. Easy indexing of al numbers from 2 to 50 and many numbers from 52 of 380. Model BS-2 is also equipped for different indexing for all numbers from 2 to 380, and for spiral cutting.
6. Accurate precision, little backlash, fine appearance and strong structure so can assure smooth rotation.
Parameters of DIVIDING HEAD: BS-2 VERTEX
DESCRIPTION | Dividing Head-Fully-Universal |
---|---|
CENTER HEIGHT | 132.7mm |
HEIGHT | 236mm |
CENTRE TAPER | B & S No.10 |
BORE | 24.5mm |
WEIGHT NETT/GROSS | 62/ 66.0kg |
VOLUME | 0.034 |
Similar Products
Stock Code | Price Exc. | Price Inc. | Dividing Head-Fully-Universal | 132.7mm | 236mm | B & S No.10 | 24.5mm | 62/ 66.0kg | 0.034 |
---|---|---|---|---|---|---|---|---|---|
DH-130000 |
$ 815.00 |
$ 937.25 |
Dividing Head-Semi-Universal | 100mm | 173mm | B & S No.7 | 18.0mm | 19/ 20kg | 0.0204 |
DH-130100 |
$ 985.00 |
$ 1,132.75 |
Deviding Head - Semi-Universal | 100mm | 173mm | B & S No.7 | 18.0mm | 16/ 18.0kg | 0.024 |
DH-130101 |
$ 173.98 |
$ 200.08 |
Back Plate -Semi-Universal | 100mm | |||||
DH-130102 |
$ 143.98 |
$ 165.58 |
Centre - Semi-Universal | 100mm | |||||
DH-130200 |
$ 1,190.00 |
$ 1,368.50 |
Divioding Head - Semi-Universal | 128mm | 220mm | B & S No.9 | 20.0mm | 35/ 36,0kg | 0.033 |
DH-130300 |
$ 1,205.00 |
$ 1,385.75 |
Dividing Head-Semi-Universal | 128mm | 220mm | B & S No.9 | 20.0mm | 35/ 36.0kg | 0.033cm |
DH-130400 |
$ 2,210.00 |
$ 2,541.50 |
Dividing Head-Fully-Universal | 132.7mm | 236mm | B & S No.10 | 24.5mm | 62/ 66.0kg | 0.034 |
DH-130425 |
$ 139.00 |
$ 159.85 |
Gear for BS1 Dividing Head | 0.0001 | |||||
DH-130426 |
$ 59.00 |
$ 67.85 |
Shaft to suit BS1 Dividing Head | 0.0001 | |||||
DH-130427 |
$ 59.00 |
$ 67.85 |
Threaded Clamp Bolt - BS1 | 0.0001 | |||||
DH-130500 |
$ 335.00 |
$ 385.25 |
Dividing Plates - BS-2 | ||||||
DH-130505 |
$ 165.00 |
$ 189.75 |
WORM WHEEL - BS-0 |