Specials
was
$2.90 (Exc)
$2.18 (Exc GST)
$2.51 (Inc GST)
was
$3.40 (Exc)
$2.55 (Exc GST)
$2.93 (Inc GST)
was
$4.90 (Exc)
$3.68 (Exc GST)
$4.23 (Inc GST)
was
$6.50 (Exc)
$4.88 (Exc GST)
$5.61 (Inc GST)
was
$830.00 (Exc)
$622.50 (Exc GST)
$715.88 (Inc GST)
was
$860.00 (Exc)
$645.00 (Exc GST)
$741.75 (Inc GST)
×
![]()
VNMG : 160408 - R3 - PM - PHG125 (PALBIT)
SKU: LTT900342
Availability: In Stock
Price per Unit
$13.20 (Exc GST)
$15.18 (Inc GST)
FEATURES:
- Excellent chip control even when machining with a small depth of cut
- Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance
- The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear
- Techical Features (PHG) for high wear resistance and long life
Parameters of VNMG : 160408 - R3 - PM - PHG125 (PALBIT)
| BRAND | PALBIT (EUROPE) SINCE 100YEARS |
|---|---|
| MODEL | VNMG 160408 -PM - PHG125 |
| APPLICATION | Wet and Dry Machining, External & Internal Turning. Roughing to finishing. |
| FIRST CHOICE FOR TURNING | Stainless, Steel, Cast Iron and any Hard Material. |
| COATING 1. | TOP COATING (TIN) CVD- ALUMINA COATING |
| COATING 2. | INNER COATING TI(TIC,N) |
| HEAT- RESISTANT SUBSTRADE | The cemented-carbide substrate adds high strength for application with focus on high material rmoval |
| WEIGHT NETT/GROSS | 0.005KG |
| VOLUME | 0.0001 |
Similar Products
| Stock Code | Price Exc. | Price Inc. | PALBIT (EUROPE) SINCE 100YEARS | VNMG 160408 -PM - PHG125 | Wet and Dry Machining, External & Internal Turning. Roughing to finishing. | Stainless, Steel, Cast Iron and any Hard Material. | TOP COATING (TIN) CVD- ALUMINA COATING | INNER COATING TI(TIC,N) | The cemented-carbide substrate adds high strength for application with focus on high material rmoval | 0.005KG | 0.0001 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| LTT900342 |
$ 13.20 |
$ 15.18 |
PALBIT (EUROPE) SINCE 100YEARS | VNMG 160408 -PM - PHG125 | Wet and Dry Machining, External & Internal Turning. Roughing to finishing. | Stainless, Steel, Cast Iron and any Hard Material. | TOP COATING (TIN) CVD- ALUMINA COATING | INNER COATING TI(TIC,N) | The cemented-carbide substrate adds high strength for application with focus on high material rmoval | 0.005KG | 0.0001 |
| LTT900010 |
$ 27.84 |
$ 32.02 |
Canala | NT2R TIN16 SCREWCUT INSERT | 0.0001 | ||||||
| LTT900012 |
$ 38.00 |
$ 43.70 |
Canala | NT3R TIN16 SCREWCUT INSERT | 0.0001 | ||||||
| LTT900031 |
$ 49.92 |
$ 57.41 |
Canala | NR-3031R TIN16 RADIUS GROOVING | 0.0001 | ||||||
| LTT900041 |
$ 57.60 |
$ 66.24 |
Canela | 0.0001 | |||||||
| LTT900045 |
$ 57.60 |
$ 66.24 |
Canela | 0.0001 | |||||||
| LTT900052 |
$ 49.92 |
$ 57.41 |
0.0001 | ||||||||
| LTT900053 |
$ 30.00 |
$ 34.50 |
SECO 150.10-3N-14 T25M | 0.0001m3/ 0.0003 | |||||||
| LTT900054 |
$ 260.00 |
$ 299.00 |
150.10A-20-3 | ||||||||
| LTT900090 |
$ 42.00 |
$ 48.30 |
0.0001 | ||||||||
| LTT900095 |
$ 65.00 |
$ 74.75 |
0.0001 | ||||||||
| LTT900100 |
$ 90.00 |
$ 103.50 |
Sitech | TCMT 110204 | 0.0001m3/ 0.0003 | ||||||
| LTT900110 |
$ 67.00 |
$ 77.05 |
Sitech | 0.0001 | |||||||
| LTT900120 |
$ 95.00 |
$ 109.25 |
Sitech | 2381-7 | 0.0001m3/ 0.0003 | ||||||
| LTT900150 |
$ 65.00 |
$ 74.75 |
0.0001 | ||||||||
| LTT900160 |
$ 37.72 |
$ 43.38 |
LSO16.0200 | 0.0001 | |||||||
| LTT900170 |
$ 39.68 |
$ 45.63 |
LSO16/.0250TL20 | 0.0001 | |||||||
| LTT900180 |
$ 39.68 |
$ 45.63 |
COT90144 | 0.0001 | |||||||
| LTT900181 |
$ 14.99 |
$ 17.24 |
|||||||||
| LTT900181A |
$ 19.20 |
$ 22.08 |
Wet and Dry Machining, External & Internal Turning. Roughing to finishing. | The cemented-carbide substrate adds high strength for application with focus on high material rmoval | 0.003kg | 0.0001 | |||||
| LTT900182 |
$ 14.99 |
$ 17.24 |
PALBIT (EUROPE) SINCE 100 YEARS | CCMT-060208-MP-R3- PHG125 (PALBIT) | Wet and Dry Machining, External & Internal Turning. Roughing to finishing. | The cemented-carbide substrate adds high strength for application with focus on high material rmoval | |||||
| LTT900182A |
$ 14.99 |
$ 17.24 |
PALBIT (EUROPE) | CCMT-060208-MP-R3- PH5115 (PALBIT) | Wet and Dry Machining, External & Internal Turning. Roughing to finishing. | The cemented-carbide substrate adds high strength for application with focus on high material rmoval | 0.005kg | 0.0001 | |||
| LTT900183 |
$ 13.00 |
$ 14.95 |
PALBIT (EUROPE) SINCE 100 YEARS | CCMT-09T304-MP-R3- PHG125 (PALBIT) | Wet and Dry Machining, External & Internal Turning. Roughing to finishing. | The cemented-carbide substrate adds high strength for application with focus on high material rmoval | |||||
| LTT900183A |
$ 13.00 |
$ 14.95 |
PALBIT (EUROPE) SINCE 100 YEARS | CCMT-09T304-MP-R3- PHG115 (PALBIT) | Wet and Dry Machining, External & Internal Turning. Roughing to finishing. | The cemented-carbide substrate adds high strength for application with focus on high material rmoval | |||||
| LTT900183B |
$ 13.00 |
$ 14.95 |
PALBIT (EUROPE) SINCE 100 YEARS | CCMT-09T304-MP-R3- PHG115 (PALBIT) | Wet and Dry Machining, External & Internal Turning. Roughing to finishing. | The cemented-carbide substrate adds high strength for application with focus on high material rmoval | 0.005kg | 0.0001 | |||
| LTT900184 |
$ 13.00 |
$ 14.95 |
PALBIT (EUROPE) SINCE 100 YEARS | CCMT-09T308-MP-R3- PHG125 (PALBIT) | Wet and Dry Machining, External & Internal Turning. Roughing to finishing. | The cemented-carbide substrate adds high strength for application with focus on high material rmoval | 0.005kg | 0.0001 |
