ROUGH E/MILL: 25.0MM CARBIDE COATED STEEL 3 FLUTE
SKU: EM-7486225
Availability: Please Inquire
Price per Unit
$260.99 (Exc GST)
$300.14 (Inc GST)
OPTIONAL ACCESSORIES:
* Milling chucks * Cutting fluids * ER Collets * Collet chuck wrenches.
FEATURES:
* Milling chucks * Cutting fluids * ER Collets * Collet chuck wrenches.
FEATURES:
- Roughing Cutters in the round tool sector are better known as "RMR" cutters (Rapid Metal Removal)
- They (more commonly) will incoporate a typical spiral helix shape of multiple flutes which is a helix of between 20 and 40degrees
- The cutting edge is broken into many segments that look like serations or multiple small radii
- Tradesmen are of the opnion that the best RMR designs are ones that incorporate rounder profile serations
- This is for obvious reasons that mainly lead to increased cutting edge strength
- Having a broken edge has some benefts but also some draw backs
- Ultimately, all you really get is the ability "To produce smaller chips per cm3/min (i3/min) of material machined"
- By getting lots of smaller chips, you are able to get much better smarf removal/control and therefore, in some cases, are able to run a higher D.O.C (depth of cut) and/or f/z (feed per
- The main reasons for RMR cutters being in existence is lower cutting forces, higher tool life and less bending when milling a shoulder at a high depth of cut
- A broken edge greatly lowers the forces generated on the cutting edge. This can be a reduction of as much as 50% and an increase in tool life of as much as 50% can also be seen
Parameters of ROUGH E/MILL: 25.0MM CARBIDE COATED STEEL 3 FLUTE
DESCRIPTION | Roughing End Mill |
---|---|
DIAMETER | 25.0mm |
MATERIAL | Carbide |
FLUTES | 3 Flute |
LENGTH O/A | 104.0mm |
FLUTE LENGTH | 38.0mm |
SHANK DIAMETER | 25.0mm |
SHANK TYPE | Flatted Shank |
FINISH | Coated |
WEIGHT NETT/GROSS | 0.080kg |
VOLUME | 0.0001cm |
MATERIAL TO USE | * Fast cutting stainless * Hard Steel * Tool steel and other hard materials |
Similar Products
Stock Code | Price Exc. | Price Inc. | Roughing End Mill | 25.0mm | Carbide | 3 Flute | 104.0mm | 38.0mm | 25.0mm | Flatted Shank | Coated | 0.080kg |
---|---|---|---|---|---|---|---|---|---|---|---|---|
EM-7486225 |
$ 260.99 |
$ 300.14 |
Roughing End Mill | 25.0mm | Carbide | 3 Flute | 104.0mm | 38.0mm | 25.0mm | Flatted Shank | Coated | 0.080kg |
EM-700204 |
$ 19.00 |
$ 21.85 |
1/8" | HSS-M2 | 3 Flute | Ground-Bright | 0.060kg | |||||
EM-700310 |
$ 29.16 |
$ 33.53 |
3.0mm | HSS-M35 | 3 Flute | Ground - Bright | 0.011/0.015kg | |||||
EM-700318 |
$ 37.43 |
$ 43.04 |
8.0mm | HSS-M35 | 3 Flute | Ground-Bright | 0.033/0.04kg | |||||
EM-700319 |
$ 37.43 |
$ 43.04 |
9.0mm | HSS-M35 | 3 Flute | Ground-Bright | 0.038/0.040kg | |||||
EM-700322 |
$ 32.00 |
$ 36.80 |
12.0mm | HSS-M35 | 3 Flute | Ground-Bright | 0.06 /0.06kg | |||||
EM-700324 |
$ 38.00 |
$ 43.70 |
14.0mm | HSS-M35 | 3 Flute | Ground-Bright | 0.061 / 0.063kg | |||||
EM-700404 |
$ 16.00 |
$ 18.40 |
4.0MM | HSS-M2 | 4 Flute | Ground-Bright | 0.014/0.020kg | |||||
EM-700406 |
$ 17.00 |
$ 19.55 |
4.5MM | HSS-M2 | 4 Flute | Ground-Bright | 0.012/0.015kg | |||||
EM-700408 |
$ 18.00 |
$ 20.70 |
5.0mm | HSS-M2 | 4 Flute | COATED | 0.013/0.015kg | |||||
EM-700424 |
$ 24.00 |
$ 27.60 |
9.0mm | HSS-M2 | 4 Flute | Ground-Bright | 0.039/0.045kg | |||||
EM-700432 |
$ 27.40 |
$ 31.51 |
11.0mm | HSS-M2 | 4 Flute | Ground-Bright | 0.062/0.070kg | |||||
EM-700440 |
$ 29.80 |
$ 34.27 |
13.0mm | HSS-M2 | 4 Flute | Ground-Bright | 0.069/0.075kg | |||||
EM-700448 |
$ 32.20 |
$ 37.03 |
15.0mm | HSS-M2 | 4 Flute | Ground-Bright | 0.076/0.080Kg | |||||
EM-700452 |
$ 33.40 |
$ 38.41 |
16.0MM | HSS-M2 | 4 Flute | Ground-Bright | 0.128/0.130kg | |||||
EM-700456 |
$ 34.60 |
$ 39.79 |
17.0MM | HSS-M2 | 4 Flute | Ground-Bright | 0.132/0.140kg | |||||
EM-700460 |
$ 35.80 |
$ 41.17 |
18.0MM | HSS-M2 | 4 Flute | Ground-Bright | 0.118/0.120Kg | |||||
EM-700464 |
$ 41.00 |
$ 47.15 |
19.0MM | HSS-M2 | 4 Flute | Ground-Bright | 0.142/0.150kg | |||||
EM-700484 |
$ 56.60 |
$ 65.09 |
24.0MM | HSS-M2 | 4 Flute | Ground-Bright | 0.404/0.50kg | |||||
EM-700630 |
$ 17.00 |
$ 19.55 |
11/32" | HSS-M2 | 4 Flute | Ground-Bright | 0.040kg | |||||
EM-700640 |
$ 18.00 |
$ 20.70 |
7/16" | HSS | 4 Flute | Ground-Bright | 0.061/0.07kg | |||||
EM-700650 |
$ 24.00 |
$ 27.60 |
5/8" | HSS | 4 Flute | Ground-Bright | 0.138kg/0.150kg | |||||
EM-700660 |
$ 35.00 |
$ 40.25 |
7/8" | HSS | 4 Flute | Ground-Bright | 0.344/0.350kg | |||||
EM-700730 |
$ 30.00 |
$ 34.50 |
1/8" | HSS | 4 Flute | Ground-Bright | 0.011/0.015kg | |||||
EM-700740 |
$ 35.00 |
$ 40.25 |
7/16" | HSS | 4 Flute | Ground-Bright | 0.068/0.07kg | |||||
EM-700808 |
$ 7.99 |
$ 9.19 |
3.0mm | HSS | 4 Flute | TIN Coated | 0.018/0.020kg |